What is Fractional CO2 Laser?
CO2 Fractional laser is the most advanced conceptual fractional CO2
skin peeling laser system with a wavelength of 10600nm. In addition
to its fine skin-peeling effect, it can effectively penetrate the
laser beam into the dermis . It is the most beneficial skin
recovery system and can achieve the long-term effect of collagen
remodeling as well as improvement of aged skin conditions due to
exposure to light. It can be very safely applied to various types
of scars compared to the existing 100% total layer skin peeling
lasers (CO2 or Er: YAG). In addition, it does not require a long
period of recovery or side effects. It can remodel various types of
deformed scars and skin tissue very effectively.
Product Description
1. Vaginal tightening principle
Vaginal tightening laser is the use of water uptake 10600nm gold
standard laser, using a three-dimensional lattice technology and
360-degree circular emission perfect combination of technology, to
produce 50-70 degrees Celsius in a controlled depth of the vaginal
mucosa, stimulate lamina propria and myometrium newborn
fibroblasts, and damaged collagen fibers, elastic fibers, such as
restructuring, so as to achieve vaginal wall thickening and
tighteningof the vagina so that firmness, sensitivity enhancement,
vagina tight as ever.
2. Skin resurfacing principle
This technology is known as Fractional Photothermolysis theory
(dot-matrix light and heat decomposition), the 10.6μm far-infrared
laser will evenly mark with tiny holes, and then cause a series
biochemical reactions inside the skin, thus to reach the results of
skin lifting & resurfacing, pigments and scar removal, etc, finally
let the skin return to young again.
| Item Name | Fractional CO2 Laser |
| Item No. | 20201020 |
| Voltage | 100-240V 50/60Hz |
| Power | 60W |
| Wavelength | 10600nm |
| Laser apparatus | Sealed off laser device simulated by direct current |
| Spot size | 0.02~0.05mm2 |
| Aiming beam: | Red semiconductor laser (635nm, less than 5mw) |
| Beam transport device | Articulated arm with 7-joint and balance weight |
| Working mode | Continuous operation |
| Output Mode | Continuous, single pulse, interval pulse and super pulse |
| Scan scope | Max 20mmx20mm |
| Scan graphics | Circle, triangle, square, rectangle,hexagon, ellipse, line |
| Scanning Mode | Random , Normal and Midsplit scan |
| Scanning speed | More than 10m/s |
| Energy | 1- 60W |
| Distance | 0.1-2.6mm |
| Cooling system | Water and air circulation |
| Relative humidity | Less than 80% |
| Weight | 80kg |
| Packing Size | 58*62*130cm |
